Description
PACIFIC THERMAFIC SYN 6000 is the preferred product for a wide range of heat transfer applications. It is stable, does not decompose readily at high temperatures, and can be used effectively in liquid phase systems. Thermic fluid has low viscosity throughout the entire operating range results in efficient heat transfer, start-up and pumping problems are minimized. The thermic fluid is non-corrosive to common metal and alloys.
PACIFIC THERMAFIC SYN 6000 fulfilling the following thermic fluid selection criteria:
The important properties that help to determine the viability of a heat transfer thermic fluid. We have fulfilled the technical criteria and are mentioned below:
- Thermal Stability: It possesses unsurpassed thermal stability at temperature of -15 °C to 325 °C. The maximum recommended film temperature is 350 °C.
- Maximum Bulk Temperature Range: It is recommended to be used in liquid phase from -15 °C to 325 °C.
- Freeze Point: It has freezing point of -35 °C and can be used without steam tracing in installation protected from weather.
- Viscosity: The Viscosity of PACIFIC THERMAFIC SYN 6000 is low up to 22 cSt @ 40 °C. As a result, start up problems and thermic fluid damages are minimized with better heat transfer and flow rate.
- Negligible Vapour Pressure: It is miraculous property of synthetic thermic fluid which leads to very less or negligible vapor pressure due to molecular structures.
- Additive % in product: It is blended with special silicon additives. This silicon additives forms layer on the carbon particles and stop the deposition of carbon in the system i.e. carbon flows along with thermic fluid and special anti oxidants immune the fluid against oxidation. Blend of special and powerful antioxidant additives resulting much better performance than market products.
- Co-efficient Thermal Expansion: Expansion of the thermic fluid due to heat in relation to temperature & volume shows the increase decrease in viscosity and higher heat transfer. It has expansion rate of 0.00096/°C
- Corrosivity: It is non-corrosive towards common metal and alloys. Even at the high temperatures equipment usually exhibits excellent service life. Original equipment in many systems can even used after 20 years of continuous service.
- Flash Point (COC): Flash point is in indication of first point fire risk and it has no relation with the performance of the thermic fluid but with plan running without nitrogen blanketing should have minimum of 170 °C, and as PACIFIC THERMAFIC SYN 6000 has more and stables flash point of 210 °C, so it can be counted better in this regards.
- Compatibility: PACIFIC THERMAFIC SYN 6000 is fully compatible with most of the other brands of Minerals as well as Synthetic thermic fluids in the market.
Benefits
- Decreases Viscosity: If a lower viscosity thermic fluid (PACIFIC THERMAFIC SYN 6000) is added in an existing system it will get an advantage of overall decrease in viscosity.
- Resisting Carbon Particles deposition: PACIFIC THERMAFIC SYN 6000 with its silicon additives technology makes a layer on the carbon particles and prevents their sticking nature. Thus the carbon particles keep on flowing along with the thermic fluid without getting stagnancy. Resulting in good heat transfer even if the carbon exists in the system.
- Blend of Special Anti-Oxidants: Addition of PACIFIC THERMAFIC SYN 6000 (Which is blended with special types of anti-oxidant) in your existing thermic fluid will develop a strong immunity against oxidation.
- Optimum bulk temperature: It has an optimal range of temperature from –15 °C to 325 °C, which minimizes the chances of thermal cracking at higher accidental temperatures and supports the thermic fluid to easily with stand higher temperature altitudes.
- Decrease Carbon Emission: The chemistry and mechanism of PACIFIC THERMAFIC SYN 6000 is developed in such a way that even if there is thermal cracking or oxidation cracking it releases less carbon and your system last long with good efficiency
