Description
PACIFIC GEARSYN HVI Series are a complete line of products designed for gear applications operating at high temperatures and/or very low temperatures, severe conditions, or requiring extreme pressure (EP) protection
Applications
PACIFIC GEARSYN HVI Series are recommended for gears requiring EP protection, operating under high temperatures, for applications which experience a wide range of temperatures and where a long lasting fluid is desired for extended drain intervals.
They are particularly recommended for lubricating industrial enclosed gears, “sealed-for-life” systems, and heavily loaded plain or roller element bearings. With proper maintenance, the useful service life of the lubricants may be extended beyond the traditional six months or 2500 operating hours associated with mineral oils. They are recommended for splash, idler immersion systems, forced drip and mechanical spray systems.
The ISO 320 grade is recommended for splash and pressure lubrication systems operating between 50 °F and 125 °F with pitch line velocity under 1000 ft/minute; the ISO 460 grade is recommended for the same temperatures if the pitch line velocity is over 1000 ft/minute. Higher viscosity grades are recommended for idler immersion systems. No flushing or cleaning is required when converting from mineral oils to these synthetic products.
PACIFIC GEARSYN HVI Series ISO 68 and ISO 100 are formulated for use in the lubrication of manual transmissions and transaxles which require an API GL-4 lubricant. They can be used in foreign and domestic passenger cars, light trucks, sport utility vehicles and vans.
Grades
PACIFIC GEARSYN HVI 68, PACIFIC GEARSYN HVI 100, PACIFIC GEARSYN HVI 150, PACIFIC GEARSYN HVI 220, PACIFIC GEARSYN HVI 320, PACIFIC GEARSYN HVI 460 & PACIFIC GEARSYN HVI 680
